Multi-Grip features
from 16A to 125A
Quicker, better, more reliable
Special screw fitting

Simply safe

Special screw fitting

The special threaded fitting is secured with a saw tooth thread, which prevents self-induced and unintentional loosening, while plugging and unplugging the connector. The working surface of the threaded fitting is amply dimensioned for commercially available spanners.

Simply secure

Simply secure

Lamella effect

18 flexible fins adapt themselves to the thinnest or thickest cable diameters, when the threaded fitting is tightened. They guarantee optimal strain relief, while at the same time protecting the cable. The tensile strength exceeds by far the values required by the standards IEC 60309, EN 60309 and VDE 0623.

Simply dry

Simply dry

Drainage opening

Water will no longer remain in the flared opening; instead it is removed through the drainage holes. Water is absolutely prevented from entering the inner connection space, even when the cable is moved.

Simple to close

Simple to close

Rubber seal

When firmly fastened, permanent rubber seal enables the connection to be simplified. In the event of a proper installation, class IP67 protection will be achieved.

Multi-Grip adapts effortlessly to cable diameters
a better answer to ‘old style’ cable glands

Multi-Grip adapts effortlessly to cable diameters!

The following cable diameters can be inserted, without affecting the cosure or capacity for strain relief.

16A 3 - 4 pins
16A 5 pins
32A 3 - 4 pins
32A 5 pins
63A 3 - 5 pins
125A 3 - 5 pins

Cable Diameter (mm)
8 - 18
10 - 21
11 - 23.5
13 - 27
16 - 36
26 - 50

Further valuable time saved in making connections

Time saving with:
32A 5 pin: = 52%
63A 5 pin: = 42%

a better answer to ‘old style’ cable glands

Rubber reducing rings and internal strain relief systems are no longer needed.
Increased internal wiring space.
Easier and faster wiring becomes possible.